Self-Aligning Roller Bearing

This kind of bearing can carry great radial load and a little axial load but it is seldom used to carry sole axial load. The spherical outer ring raceway grant the bearing self-aligning function so that the bearing can keep well performance when the shaft have deformation under heavy load or the tilt degree between outer and inner rings are not exceed the tolerance range from 0.5 to 2. The only difference between self-aligning roller bearing and self-aligning ball bearing is the rolling elements. For its roller could carry heavy load, this kind of bearing is widely used in mining or heavy machinery. The bearing can limit the axial displacement of the shaft or housing to the range of axial tolerance. Aligning ball and roller bearings can be substituted for each other if there are no special requests on load or rotating speed.

Bearing No. dimension(mm) Weight
d      D    B     kg
22208 40   80     23  0.55
22209 45   85     23  0.59
22210 50   90     23  0.67
22211 55   100    25  0.86
22212 60   110    28  1.22
22213 65   120    31  1.63
22214 70   125    31  1.64
22215 75   130    31  1.75
22216 80   140    33  2.23
22217 85   150    36  2.79
22218 90   160    40  3.78
22219 95   170    43  4.31
22220 100  180    46  5.06
22222 110  200    53  7.4
22224 120  251    58  9.13
22226 130  230    64  11.3
22228 140  250    68  14.5
22308 40   90     33  1.07
22309 45   100    36  1.39
22310 50   110    40  1.83
22311 55   120    43  2.4
22312 60   130    46  2.94
22313 65   140    48  3.49
22314 70   150    51  4.25
22315 75   160    55  5.34
22316 80   170    58  6.24
22317 85   180    60  7.36
22318 90   190    64  8.67
22319 95   200    67  9.88
22320 100  215    73  13.1
22322 110  240    80  18
22324 120  260    80  21.7
22326 130  280    93  28.2
22328 140  300    102 34.9.